|
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
|
|
|
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
|
|
| PANEL INSTALLATION GUIDE
TOC > TOOLS
OF THE TRADE > CIRCULAR SAW
Tools of the Trade B. Circular saw. You can make many panel cuts with a circular saw. You’ll need to cut your panels from both sides and often finish cutting the foam with a handsaw. You can also cut your door and window openings this way. Start by cutting the inside face of the rough opening. Then drill a perpendicular hole 5/8" diameter to the outside face. Be very careful to keep this hole perpendicular to the panel! Mark the panel between holes outside, and cut that face. Finish cuts with a handsaw if you need to. |
|
Copyright © 2001-2004 by R-Tight® Stress Skin Panel. All rights reserved. |