R-Tight Panel
PO Box 700
Jeffersonville, VT 05464-0700

phone
(802) 644-2500

fax
(802) 644-2773

email info@rtight.com

Tools of the Trade

C. Beam-cutter saw. The best way to cut your panels is with an attachment for a circular saw that turns your saw into a small, easily controlled electric chain saw. You can use this attachment to cut even very thick roof panels - this will be your tool of choice for cutting angles. Be sure to keep your blade well lubricated. You should spray the chain with a good lubricant like WD-40® every few cuts. It helps to do this with your saw running.

> HOT KNIFE